Urc47 10e Manual

How to Use URC47 10E Universal Remote Control

The URC47 10E is a universal remote control that can operate various devices such as TVs, DVD players, and robots. It has a simple design with four device buttons (TV, DVD, AUX, and ROB) and a set of common functions (POWER, VOL+, VOL-, CH+, CH-, MUTE, MENU, etc.). To use the URC47 10E, you need to program it with the correct code for your device. Here are the steps to do that:

Turn on your device.

Press and release the device button that corresponds to your device (TV, DVD, AUX, or ROB).

Press and hold SET until the red light blinks twice, then release SET.

Enter the four-digit code for your device. You can find the code list at the end of this article or online at https://xcconcepts.com/wp-content/uploads/2022/07/urc47_10e_manual.pdf. If you enter the code correctly, the red light will blink twice again.

Aim the remote at your device and press POWER. Your device should turn off. If not, repeat steps 2-4 with another code until you find the one that works.

Your remote is now programmed to operate your device.

To use the remote, simply press the device button and then the function button you want. For example, to change the channel on your TV, press TV and then CH+ or CH-. To control a robot via TCP/IP, press ROB and then enter the IP address of the robot using the number buttons. For more details on how to control a robot remotely, see https://www.universal-robots.com/articles/ur/interface-communication/remote-control-via-tcpip/.

Code List for URC47 10E Universal Remote Control

DeviceBrandCode

TVSamsung0144, 0040, 0060, 0030, 0178, 0019, 0056

TVLG0178, 0017, 0037, 0056

DVDSony0533, 1533, 0864, 1033

DVDPanasonic0490, 1490, 1762

AUXBose1933, 1938

AUXJBL1738

ROBUniversal Robots1649

ROBKUKA Robots1650

The URC47 10E universal remote control is a versatile and easy-to-use device that can make your life more convenient. You can use it to control multiple devices with one remote, saving you the hassle of switching between different remotes. You can also use it to control devices that are not in your line of sight, such as robots or smart home appliances. The URC47 10E has a long battery life and a durable design that can withstand drops and spills. It also has a backlight function that allows you to see the buttons in the dark.

Some tips for using the URC47 10E universal remote control are:

Always point the remote directly at your device and make sure there are no obstacles between them.

If the remote does not work properly, check the batteries and replace them if necessary.

If you have more than one device of the same type (e.g., two TVs), you can assign them to different device buttons by using different codes.

If you want to control a device that is not listed in the code list, you can try the code search function. To do this, press and hold SET until the red light blinks twice, then release SET. Press and release the device button, then press and hold POWER until your device turns off. Release POWER and press SET to save the code.

If you want to reset the remote to its factory settings, press and hold SET until the red light blinks twice, then release SET. Press 9-8-1 and wait for the red light to blink four times.

We hope you enjoy using the URC47 10E universal remote control and find it useful for your daily needs. If you have any questions or feedback, please contact us at urc47@xcconcepts.com. 061ffe29dd