CS-2200 Icom IC-2200H Programming Software Full Version WORK

How to Download and Install CS-2200 Icom IC-2200H Programming Software Full Version

If you own an Icom IC-2200H transceiver, you may want to use the CS-2200 programming software to customize its settings and features. The CS-2200 software allows you to program memory channels, scan functions, tone frequencies, and other options on your IC-2200H. However, you may have trouble finding the full version of the software online, as it is not available on the official Icom website. In this article, we will show you how to download and install CS-2200 Icom IC-2200H programming software full version on your Windows PC.

Step 1: Download the CS-2200 Software

The first step is to download the CS-2200 software from a reliable source. You can use the link below to download the software from our website. The file size is about 3 MB and it is a zip file that contains the setup.exe file and a readme.txt file.

Download CS-2200 Icom IC-2200H Programming Software Full Version

Alternatively, you can search for other sources online that offer the CS-2200 software. However, be careful of malware or viruses that may infect your computer. Always scan the downloaded files with an antivirus program before opening them.

Step 2: Install the CS-2200 Software

The next step is to install the CS-2200 software on your PC. To do this, follow these steps:

Extract the zip file to a folder on your PC.

Double-click on the setup.exe file to launch the installation wizard.

Follow the instructions on the screen to complete the installation process.

When prompted, choose a destination folder for the software. You can use the default location or change it to your preference.

Click Finish to exit the installation wizard.

The CS-2200 software should now be installed on your PC. You can find it in the Start menu or on your desktop.

Step 3: Connect Your IC-2200H to Your PC

The final step is to connect your IC-2200H transceiver to your PC using a USB cable. You will need a USB-A to USB-B cable that is compatible with your IC-2200H. You can buy one online or from a local electronics store.

To connect your IC-2200H to your PC, follow these steps:

Turn off your IC-2200H and your PC.

Plug one end of the USB cable into the USB port on the back of your IC-2200H.

Plug the other end of the USB cable into a free USB port on your PC.

Turn on your PC and wait for it to boot up.

Turn on your IC-2200H and set it to VFO mode by pressing and holding the V/MHz button for one second.

Your PC should recognize your IC-2200H and install the necessary drivers automatically. You should see a notification on your screen that says \"Device driver software installed successfully\". If not, you may need to download and install the drivers manually from the Icom website.

Step 4: Run the CS-2200 Software

The last step is to run the CS-2200 software and start programming your IC-2200H. To do this, follow these steps:

Open the CS-2200 software from the Start menu or from your desktop.

Select \"ICOM\" from the \"Model\" menu and \"IC-2200\" from the \"Type\" menu.

Select \"USB\" from the \"Port\" menu and click \"OK\".

The software should connect to your IC-2200H and display its current settings on the screen.

You can now edit or change any settings you want using the software interface.

To save your changes to your IC-2200H, click \"Write\" and wait for the process to complete. 061ffe29dd