Vag Tacho 3.01 Driver BEST Download
Download ->->->-> https://urluss.com/2tyGBB
How to Install Vag Tacho 3.01 Drivers on Windows
Vag Tacho 3.01 is a diagnostic tool that allows you to connect your Vag-Tacho USB devices to your Windows PC and access various functions of your car's kombiinstrument, such as reading and programming the odometer, immobilizer PIN code, and keys. However, before you can use this tool, you need to install the correct drivers for your OBD interface and your Windows operating system. In this article, we will show you how to download and install Vag Tacho 3.01 drivers on Windows XP, Vista, 7, 8, 10 and 11.
Step 1: Download Vag Tacho 3.01 Drivers
The first step is to download the Vag Tacho 3.01 drivers from a reliable source. You can use the link provided by Autokeys, which offers both the Vag Tacho software and the drivers for free[^3^]. Alternatively, you can download the drivers directly from Free Download Manager, which also provides a description and a screenshot of the software[^2^]. Save the downloaded file to a convenient location on your computer.
Step 2: Connect OBD Interface to USB Port
The next step is to connect your OBD interface to any free USB port on your computer. This will start the Windows procedure to install drivers for new hardware found. If Windows does not recognize your device automatically, you will need to manually show Windows where the drivers are on your hard disk.
Step 3: Install Drivers Manually
To install the drivers manually, follow these steps:
Open Device Manager by right-clicking on the Start menu and selecting Device Manager.
Find your OBD interface under Other devices or Ports (COM & LPT). It may be labeled as USB Serial Port or FTDI FT245R.
Right-click on your OBD interface and select Update driver.
Select Browse my computer for driver software.
Select Let me pick from a list of available drivers on my computer.
Select Have Disk and browse to the folder where you saved the downloaded drivers.
Select the appropriate driver for your device and click Next.
Follow the on-screen instructions to complete the installation.
Step 4: Run Vag Tacho Software
Once you have installed the drivers successfully, you can run the Vag Tacho software by double-clicking on the VagTacho.exe file in the same folder where you saved the drivers. You should see a window like this:
Now you can connect your OBD interface to your car's diagnostic socket and select your car model from the list. The software will try to connect to any kombi and will display the type of the kombiinstrument. You can then access various functions of your car's kombiinstrument by clicking on the buttons on the left side of the window.
Tips and Troubleshooting
If you have trouble installing or running the Vag Tacho software, you may need to disable antivirus or firewall software temporarily or run the software as administrator.
If you have trouble connecting to your car's kombiinstrument, you may need to check your cable connection, switch ignition on/off, or select a different COM port from the settings menu.
If you want to see a video tutorial on how to install and use Vag Tacho 3.01 on Windows 7, you can watch this YouTube video by Manekas A[^1^]. The same procedure applies for Windows XP and 8, but on Windows 10 and 11 it is not running well according to some users.
If you need more help 061ffe29dd