X-BQ P8S Flash File MT6580 5.1 Lcd Fix Firmware
Click Here ->->->-> https://urluso.com/2tzpdJ
How to Flash X-BQ P8S MT6580 5.1 Lcd Fix Firmware
If you are looking for a way to fix your X-BQ P8S smartphone's LCD screen problem, you have come to the right place. In this article, we will show you how to flash the X-BQ P8S flash file MT6580 5.1 Lcd fix firmware on your device using a simple and easy method.
The X-BQ P8S is a budget-friendly Android smartphone that runs on the MediaTek MT6580 chipset and Android 5.1 Lollipop operating system. It has a 5.5-inch HD display, 1GB of RAM, 8GB of internal storage, and a 3000mAh battery. However, some users may encounter LCD screen issues such as flickering, black screen, white screen, or dead pixels on their X-BQ P8S devices. This can be caused by various reasons such as software bugs, hardware damage, or improper flashing.
Fortunately, there is a solution to this problem. You can flash the X-BQ P8S flash file MT6580 5.1 Lcd fix firmware on your device using a tool called SP Flash Tool. This tool allows you to flash stock ROMs, custom ROMs, recovery images, and other files on MediaTek devices. By flashing the X-BQ P8S flash file MT6580 5.1 Lcd fix firmware, you can restore your device to its original state and fix the LCD screen problem.
Before you proceed with the flashing process, you need to have the following requirements:
A Windows PC or laptop.
A USB cable to connect your device to the PC.
A backup of your personal data on your device.
A charged battery on your device (at least 50%).
The X-BQ P8S flash file MT6580 5.1 Lcd fix firmware file. You can download it from here.
The SP Flash Tool software. You can download it from here.
The MediaTek USB VCOM drivers. You can download them from here.
Steps to Flash X-BQ P8S Flash File MT6580 5.1 Lcd Fix Firmware
Once you have all the requirements ready, you can follow these steps to flash the X-BQ P8S flash file MT6580 5.1 Lcd fix firmware on your device:
Extract the X-BQ P8S flash file MT6580 5.1 Lcd fix firmware zip file on your PC.
Extract the SP Flash Tool zip file on your PC and run the flash_tool.exe file as administrator.
Click on the Scatter-loading button and browse to the folder where you extracted the X-BQ P8S flash file MT6580 5.1 Lcd fix firmware file. Select the MT6580_Android_scatter.txt file and click Open.
All the partitions of the firmware will be loaded on the SP Flash Tool window. Make sure all of them are checked except for Preloader.
Click on the Download button and connect your device to the PC via USB cable while holding the Volume Down button.
The flashing process will begin and you will see a progress bar at the bottom of the SP Flash Tool window.
Wait for the flashing process to complete. It may take a few minutes depending on the size of the firmware file.
Once the flashing process is done, you will see a green tick mark on the SP Flash Tool window indicating that the flashing was successful.
Disconnect your device from the PC and reboot it.
Congratulations! You have successfully flashed the X-BQ P8S flash file MT6580 5.1 Lcd fix firmware on your device. You should now be able to enjoy your device without any LCD 061ffe29dd